Kanpur's #1 Industrial Engineering Network

Commercial HVAC, Chiller & Industrial Solutions in Kanpur

Industrial plants, commercial complexes, and manufacturing units in Kanpur: ServiceWalaa delivers heavy-duty commercial HVAC, central chillers, cold storage repair, precision motor maintenance, and 3-phase industrial power panels with 45-minute emergency dispatch.

Free Site Audit & Quote 45-Min Industrial Dispatch Certified Plant Engineers 90-Day Industrial Warranty Transparent B2B Billing OEM Spares Guarantee

Book a Technician in 60 Sec

Transparent rates & guaranteed on-site arrival in Kanpur

Zero advance payment needed. Pay after inspection.
Certified Industrial Specialists

Industrial Electrical & Commercial HVAC Services in Kanpur

Looking for certified plant engineers in Kanpur? Our verified technicians service 3-phase LT/HT panels, commercial chillers, heavy motors, and cooling towers across Panki, Dada Nagar, and Fazalganj within 45 minutes.

Heavy Motors
4.92 (760+ reviews)

Heavy Industrial Motor & VFD Testing

  • 1000V megger insulation testing and copper winding health check
  • VFD parameter tuning, speed acceleration, and torque adjustments
  • Motor shaft alignment, bearing greasing, and vibration testing
₹899₹1,499
40% OFF
FRP Cooling Towers
4.94 (640+ reviews)

Cooling Tower Descaling & Overhaul

  • High-pressure honeycomb fill pack descaling and scale removal
  • Spray nozzle cleaning, water pipe flushing, and drift eliminator fixes
  • Basin sludge cleaning, fan blade balancing, and drive motor check
₹2,499₹3,999
38% OFF
Commercial Cassettes
4.93 (1,150+ reviews)

Commercial Cassette AC 120-PSI Jet Wash

  • High-pressure jet wash for commercial ceiling cassette AC units
  • Chemical drain tray cleaning, drain pump test, and mold removal
  • Filter deep cleaning, control wiring audit, and amp load test
₹1,499₹2,199
32% OFF
Cold Chain Care
4.91 (820+ reviews)

Commercial Deep Freezer & Cold Storage

  • Walk-in cold room and deep freezer gas leak check and repair
  • Defrost timer and heater testing, thermostat check, and capillary flush
  • Pipe insulation check, expansion valve tuning, and compressor current test
₹599₹999
40% OFF
Emergency Backup
4.93 (580+ reviews)

Industrial DG Set & Generator Electricals

  • Automatic changeover (AMF) panel testing and contactor repair
  • AVR voltage regulator tuning and main terminal wire tightening
  • Battery load test, starter motor relay check, and emergency safety trip test
₹999₹1,699
41% OFF
Industrial Piping
4.90 (510+ reviews)

Heavy Pipeline Leak Test & Pressure Balancing

  • Nitrogen pressure hold test for chilled water, air, and steam lines
  • Flange gasket replacement, bolt tightening, and leak-proof sealing
  • Valve gland packing, water balancing, and line pressure testing
₹1,199₹1,999
40% OFF

Popular Add-on Industrial Diagnostic Services in Kanpur

Combine essential engineering diagnostic checks with your plant maintenance visit

APFC Relay Calibration

₹799

Motor Insulation Megger Test

₹499

Condenser Chemical Descaling

₹1,199

Nitrogen Pressure Hold Test

₹899

3-Phase Current Balancing

₹699

Control Interlock Rewiring

₹599
Industrial Master Packages

Factory Maintenance & Shutdown Packages in Kanpur

Planned maintenance packages to prevent unexpected factory breakdowns and keep your production running smoothly.

Safety Audit

Electrical Safety & Audit Pack in Kanpur

Thermal Scan, APFC Tuning & Megger Ground Audit

Infrared Thermal Scan: Complete busbar, breaker, and terminal heat check
Earth Resistance Testing: Ground pit megger testing and earthing safety audit
APFC Capacitor Tuning: Power factor correction to avoid electricity board penalties
3-Phase Amp Balancing: Equal 3-phase load distribution across distribution boards
Compliance Certification: Official electrical test report for factory safety audits
Most Popular

Chiller & HVAC Summer Prep Pack in Kanpur

Condenser Descaling, Cooling Tower Wash & Gas Audit

Shell & Tube Descaling: Chemical condenser tube descaling and scale removal
Cooling Tower Overhaul: Fill pack descaling, nozzle unclogging, and basin flush
Nitrogen Leak Testing: High-pressure holding test and gas leak detection
Compressor Oil & Suction: Oil level check, suction pressure test, and flow tuning
Performance Guarantee: 30-day cooling and chilled water flow guarantee
Plant Shutdown

Turnaround Facility Overhaul Pack in Kanpur

Multi-Trade Plant Electrical, Piping & Motor Overhaul

Plantwide Utility Audit: Full inspection of 3-phase panels, pipes, and HVAC units
Heavy Motor Testing: Motor shaft alignment, megger test, and vibration scan
Pipeline Flange Gaskets: Steam and water line flange gasket and bolt check
Breaker Trip Simulation: Testing safety trip relays and emergency cutoff switches
Facility Certificate: Detailed sign-off report for plant management
OEM Compliance & Spares

Major Industrial & Commercial Brands Serviced

Our technicians use 100% genuine OEM components for India's leading electrical, chiller, and machinery brands.

Siemens
Schneider
ABB
Voltas
Daikin
Blue Star
Kirloskar
L&T
100% Upfront Pricing

Official Industrial Solutions & Commercial HVAC Rate Card in Kanpur

Zero surprise billing. Standard diagnostic survey charges are adjusted against final repair bills upon service confirmation.

Service / Engineering Task Standard Scope of Work Official Price Warranty / Report Action
Industrial Facility Inspection & Diagnostic Survey Full multi-meter test, clamp load scan, thermal imaging & preliminary report ₹499 Adjusted in final repair bill
Commercial Cassette AC High-Pressure Servicing 120-Bar jet coil wash, chemical drain tray descale, filter wash & wiring check ₹1,499 30-Day Cooling Guarantee
Chiller Plant Preventive Maintenance & Diagnostic Shell & tube inspection, refrigerant pressure check, oil test & thermostat audit ₹1,999 30-Day Flow Warranty
Commercial Deep Freezer & Cold Storage Servicing Defrost cycle testing, thermostat recalibration, condenser clean & amp check ₹599 30-Day Cooling Guarantee
Commercial RO & Water Cooler Plant Servicing Tank sanitization, condenser brush clean, float valve check & pump test ₹499 30-Day Sanitation Warranty
Factory LT Panel & Switchgear Maintenance Busbar torque tightening, contactor de-carbonizing, relay calibration & thermal scan ₹1,499 Safety Compliance Log
Industrial Motor & VFD Parameter Tuning Megger insulation resistance test, terminal block rewiring, VFD ramp tuning ₹899 Insulation Megger Log
Cooling Tower Descaling & Overhaul High-pressure fill pack descaling, nozzle unclogging, drift repair & basin wash ₹2,499 Written Service Report
Ductable AC & Air Handling Unit (AHU) Deep Clean Blower impeller wash, pre-filter chemical cleaning, belt tensioning & duct check ₹1,299 Airflow Balance Report
Industrial DG Set Control Wiring & Electricals AMF panel auto-transfer test, AVR voltage regulation, battery load test & trips ₹999 Backup Transfer Audit
Heavy Pipeline Leak Test & Pressure Balancing Nitrogen holding pressure test, flange gasket inspection, valve replacement & flow test ₹1,199 Pressure Holding Log
Factory Annual Facility AMC Contract Scheduled monthly preventive visits, 24/7 unlimited breakdown calls & priority SLA Starting ₹9,999/yr Full Annual Contract SLA
महत्वपूर्ण सूचना (Important Note on Industrial Service Rates):
यह रेट लिस्ट शुरुआती व मानक औद्योगिक परीक्षण (Inspection & Diagnostics) के लिए अनुमानित है और यह अंतिम (Final) रेट लिस्ट नहीं है। जब हमारे सर्टिफाइड इंडस्ट्रियल इंजीनियर्स व टेक्नीशियन आपकी फैक्ट्री/साइट पर पहुँचकर मशीनरी, चिलर प्लांट, थ्री-फ़ेस पावर लोड, वायरिंग या खराब स्पेयर पार्ट्स की मौके पर पूरी तकनीकी जांच करेंगे, तो वास्तविक क्षमता व स्थिति के आधार पर कोट्स/रेट्स आगे बढ़ सकते हैं। किसी भी अतिरिक्त काम, स्पेयर पार्ट्स या मेंटेनेंस का काम आपकी पूर्व अनुमति और लिखित कोटेशन अनुमोदन (Approval) के बाद ही शुरू किया जाएगा।
Industrial Footprint

Industrial Solutions Across All Kanpur Manufacturing & Commercial Hubs

Our industrial technicians reach your factory within 45 minutes across Panki Industrial Area, Dada Nagar, Fazalganj, Rania, Rooma, and Chakeri.

Panki Industrial Area (Site 1-5)
Dada Nagar Industrial Estate
Fazalganj Industrial Area
Rania Industrial Belt
Rooma Industrial Complex
Transport Nagar
Jajmau Leather Cluster
Chakeri Industrial Zone
Armapur Estate & Factories
Juhi Industrial Belt
Kidwai Nagar Commercial Hub
Govind Nagar Industrial Units
Shastri Nagar Commercial
Sarvodaya Nagar Hub
Mall Road Commercial Zone
Civil Lines Corporate Hub
Kalyanpur Commercial Belt
Rawatpur Industrial Units
Swaroop Nagar Commercial
Barra Commercial Center
Real Answers

Frequently Asked Questions: Industrial Solutions in Kanpur

Clear, honest answers about 3-phase testing, chiller plant servicing, factory shutdown windows, and safety compliance.

How quickly can your industrial technicians reach our factory in Kanpur during an emergency breakdown?

Our industrial technicians are stationed near Panki, Fazalganj, Dada Nagar, and Rooma. In an emergency machine breakdown, our certified 3-phase electrical and HVAC technicians reach your plant within 45 to 60 minutes with complete testing and diagnostic tools.

Do you service commercial chillers and VRV/VRF systems in Kanpur?

Yes. Our HVAC technicians specialize in commercial chillers (screw, scroll, and reciprocating), cooling towers, AHUs, and VRV/VRF central AC plants across factories, cold storages, and commercial buildings.

What safety measures and PPE do your technicians follow during factory work?

Safety is our top priority. All our industrial electricians use dielectric safety boots, insulated tools tested up to 1000V, safety helmets, and strict Lockout-Tagout (LOTO) procedures on high-voltage factory floors.

Can you perform maintenance or panel repair during night shifts or Sunday shutdowns?

Yes. We provide planned shutdown maintenance during factory off-hours, night shifts, and Sundays so your daily production and manufacturing lines run without any interruption.

Do you provide official GST invoices and test reports for factory safety audits?

Yes. All commercial and industrial jobs include proper GST tax invoices, digital test reports (megger values, thermal imaging scans, APFC logs), and service sign-off sheets suitable for ISO and safety audits.

What warranty or guarantee do you provide on industrial repairs and spare parts?

All industrial electrical, HVAC, and mechanical repairs come with a 30-day service guarantee. All new OEM spare parts like contactors, breakers, VFDs, and motor spares carry their original manufacturer warranty.

Need Emergency Industrial Breakdown Support in Kanpur Today?

Minimize production downtime. Our certified 3-phase electrician or chiller technician will reach your factory in 45 minutes.

Call 8957789577